VÚRUP
    • TestingStandardisation activitiesStandardisation activities

    Standardisation activities

    The company VÚRUP, a. s. being member of the Technical Committee TK 50, Oil, gas and liquid fuels and fuels from renewable sources, it’s in a close corporation the department of technical standardization of the Slovak Office of Standards, Metrology and Testing (ÚNMS SR) in solving tasks arising from the activities in the domain of technical standardization.

    The staff of the Department Testing laboratories are systematically involved in developing new Slovak technical standards (STN) and to implement the European and ISO standards in the STN system.

    STN number and denomination Author of STN:
    STN EN ISO 18122: 2015 Solid biofuels. Determination of ash content (ISO 18122: 2015). Review of STN EN 14775:2010 Ing. Lýdia Pokorná
    STN EN ISO 18134-3: 2015 Solid biofuels. Determination of moisture content. Oven dry method. Part 3: Moisture in the analytical sample for general analysis (ISO 18134-3: 2015). Review STN EN 14774-3:2010 Ing. Lýdia Pokorná
    STN EN ISO 18134-2: 2015 Solid biofuels. Determination of moisture content. Oven dry method. Part 2: Total moisture. Simplified method (ISO 18134-2: 2015). Review STN EN 14774-2:2010 Ing. Lýdia Pokorná
    STN EN ISO 18134-1: 2015 Solid biofuels. Determination of moisture content. Oven dry method. Part 1: Total moisture. Reference method (ISO 18134-1: 2015). Review STN EN 14774-1:2010 Ing. Lýdia Pokorná
    STN EN ISO 10370: 2014 Petroleum products. Determination of carbon residue. Ash content determination (ISO 10370: 2014 Review of STN EN ISO 10370:1998:2010 Ing. Iveta Chovancová
    STN EN ISO 5164: 2014 Petroleum products. Determination of octane number of motor fuels. Research method (ISO 5164: 2014). Review of STN EN ISO 5164:2006 Ing. Dušan Stacho
    STN EN 15376: 2014 Automotive fuels. Ethanol as a blending component for petrol. Requirements and test methods. Review of STN EN 15376: 2011 Ing. Lýdia Pokorná
    STN EN 12662: 2014 Liquid petroleum products. Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters. Review of STN EN 12662: 2008 Ing. Beata Pilková
    STN EN 60422: 2013 Mineral insulating oils in electrical equipment. Supervision and maintenance guidance. Review of STN EN 60422: 2007 Ing. Róbert Franta
    STN EN ISO 13736: Determination of flash point. Abel closed-cup method (ISO/FDIS 13736: 2012 Review of STN EN ISO 13736: 2009 Ing. Iveta Chovancová
    STN EN 14214: 2012 Automotive fuels. Fatty acid methyl esters (FAME) for use in diesel engines and heating applications Requirements and test methods. Review of STN EN 14214+A1: 2010, STN EN 14213: 2004 Ing. Ľudmila Joríková
    STN EN 14275: 2012 Automotive fuels. Assessment of petrol and diesel fuel quality. Sampling from retail site pumps and commercial site fuel dispensers Ing. Lýdia Pokorná
    STN EN 14274: 2012 Automotive fuels. Assessment of petrol and diesel fuel quality. Fuel quality monitoring system (FQMS) Ing. Lýdia Pokorná
    STN EN 16214-1: 2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers. Part 1: Terminology Ing. Róbert Franta
    STN EN 16135: 2011 Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS) Ing. Iveta Chovancová
    STN CEN/TS 15293: 2011 Automotive fuels. Automotive fuel ethanol E85. Requirements and test methods. Review of TNI CWA 15293: 2007 Ing. Dušan Stacho
    STN EN 14961-4: 2011 Solid biofuels. Fuel specifications and classes. Part 4: Wood chips for non-industrial use Ing. Stanislava Hlúbiková
    STN EN 14961-3: 2011 Solid biofuels. Fuel specifications and classes. Part 3: Wood briquettes for non-industrial use Ing. Dušan Stacho
    STN EN 14961-2: 2011 Solid biofuels. Fuel specifications and classes. Part 2: Wood pellets for non-industrial use Ing. Dušan Stacho
    STN EN 15289: 2011 Solid biofuels. Determination of total content of sulphur and chlorine Ing. Ľudmila Joríková
    STN EN 15104: 2011 Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods RNDr. Marek Banič
    STN EN 14961-5: 2011 Solid biofuels. Fuel specifications and classes. Part 5: Firewood for non-industrial use RNDr. Marek Banič
    STN EN ISO 16591: 2010 Petroleum products. Determination of sulphur content. Oxidative microcoulometry method (ISO/FDIS 16591: 2010) Ing. Stanislava Hlúbiková
    STN EN 15105: 2011 Solid biofuels. Determination of the water soluble chloride, sodium and potassium content Ing. Lýdia Pokorná
    STN CEN/TS 15639: 2010 Solid recovered fuels. Determination of mechanical durability of pellets. Review of STN P CEN/TS 15639: 2008 Ing. Dušan Stacho
    STN EN 15210-2: 2010 Solid biofuels. Determination of mechanical durability of pellets and briquettes. Part 2: Briquettes Ing. Iveta Chovancová
    STN EN 15149-2: 2010 Solid biofuels. Determination of particle size distribution. Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below Ing. Lýdia Pokorná
    STN EN 15149-1: 2010 Solid biofuels. Determination of particle size distribution. Part 1: Oscillating screen method using sieve apertures of 1 mm and above Ing. Lýdia Pokorná
    STN CEN/TS 15401: 2010 Solid recovered fuels. Determination of bulk density Ing. Dušan Stacho
    STN EN 15938: 2010 Automotive fuels. Ethanol blending component and ethanol (E85) automotive fuel. Determination of electrical conductivity Ing. Martina Slezáčková
    STN CEN/TS 15414-2: 2010 Solid recovered fuels. Determination of moisture content using the oven dry method. Part 2: Determination of total moisture content by a simplified method Ing. Lýdia Pokorná
    STN CEN/TS 15414-1: 2010 Solid recovered fuels. Determination of moisture content using the oven dry method. Part 1: Determination of total moisture content by a reference method Ing. Lýdia Pokorná
    STN EN 14961-1: 2010 Solid biofuels. Fuel specifications and classes. Part 1: General requirements Ing. Dušan Stacho
    STN EN 15103: 2009 Solid biofuels. Determination of bulk density RNDr. Marek Banič
    STN EN 14775: 2009 Solid biofuels. Determination of ash content Ing. Stanislava Hlúbiková
    STN EN 15210-1: 2009 Solid biofuels. Determination of mechanical durability of pellets and briquettes. Part 1: Pellets Ing. Stanislava Hlúbiková
    STN EN 15148: 2009 Solid biofuels. Determination of the content of volatile matter Ing. Lýdia Pokorná
    STN EN 15837: 2009 Ethanol as a blending component for petrol. Determination of phosphorus, copper and sulphur content. Direct method by inductively coupled plasma optical emission spectrometry (ICP OES) Ing. Iveta Chovancová
    STN EN 15779: 2009 Petroleum products and fat and oil derivates. Fatty acid methyl esters (FAME) for diesel engines. Determination of polyunsaturated (=4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography RNDr. Marek Banič
    STN EN 14078: 2009 Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in middle distillates. Infrared spectrometry method. Review of STN EN 14078: 2005 Ing. Lýdia Pokorná
    STN EN 14774-3: 2009 Solid biofuels. Determination of moisture content. Oven dry method. Part 3: Moisture in general analysis sample Ing. Lýdia Pokorná
    STN EN 14774-2: 2009 Solid biofuels. Determination of moisture content. Oven dry method. Part 2: Total moisture. Simplified method Ing. Lýdia Pokorná
    STN EN 14774-1: 2009 Solid biofuels. Determination of moisture content. Oven dry method. Part 1: Total moisture. Reference method Ing. Lýdia Pokorná
    STN EN 12591: 2009 Bitumen and bituminous binders. Specifications for paving grade bitumens. Review of STN EN 12591: 2001 Ing. Stanislava Hlúbiková
    STN EN 14214: 2008 Automotive fuels. Fatty acid methyl esters (FAME) for diesel engines. Requirements and test methods. Review of STN EN 14214: 2004 Ing. Ľudmila Joríková
    STN EN ISO 22854: 2008 Liquid petroleum products. Determination of hydrocarbon types and oxygenates in automotive-motor gasoline. Multidimensional gas chromatography method. Review of STN EN 14517: 2005 RNDr. Marek Banič
    STN EN ISO 13736: 2008 Determination of flash point. Abel closed-cup method. Review of STN EN ISO 13736: 1999 Ing. Iveta Chovancová
    STN CEN/TR 15367-2: 2007 Petroleum products. Guide for good housekeeping. Part 2: Automotive petrol fuel. Ing. Jozef Mikulec, CSc.
    STN CEN/TR 15367-1: 2007 Petroleum products. Guide for good housekeeping. Part 1: Automotive diesel fuels Ing. Jozef Mikulec, CSc.
    STN EN 12662: 2008 Liquid petroleum products. Determination of contamination in middle distillates. Review of STN EN 12662: 2000 Ing. Martina Slezáčková
    STN EN 15470: 2007 Liquefied petroleum gases. Determination of dissolved residues. Gas chromatographic method. RNDr. Marek Banič
    STN EN 13016-1: 2007 Liquid petroleum products. Vapour pressure. Part 1: Determination of air saturated vapour pressure (ASVP). Review of STN EN 13016-1: 2003 Ing. Martina Slezáčková
    STN EN 13016-2: 2007 Liquid petroleum products. Vapour pressure. Part 2: Determination of absolute pressure (AVP) between 40 C and 100 C. Review of STN EN 13016-2: 2003 Ing. Martina Slezáčková
    STN EN 15490: 2007 Ethanol as a blending component for petrol. Determination of pHe Ing. Iveta Chovancová
    STN EN 15489: 2007 Ethanol as a blending component for petrol. Determination of water content. Karl Fischer coulometric titration method Ing. Iveta Chovancová
    STN EN 15486: 2007 Ethanol as a blending component for petrol. Determination of sulphur content. Ultraviolet fluorescence method Ing. Miriam Vrbová
    STN EN 15484: 2007 Ethanol as a blending component for petrol. Determination of inorganic chloride. Potentiometric method Ing. Iveta Chovancová
    STN EN 15553: 2007 Petroleum products and related materials. Determination of hydrocarbon types. Fluorescent indicator adsorption method RNDr. Marek Banič
    STN EN 14582: 2007 Characterization of waste. Halogen and sulphur content. Oxygen combustion in closed systems and determination methods Ing. Miriam Vrbová
    STN 65 6690: 2007 Waste oils. Review of STN 65 6690: 1991 (ČSN 65 6690 : 2003 Ing. Iveta Chovancová
    STN 65 6691: 2007 Petroleum products. Fuel oils derived from used oils. Requirements and test methods (ČSN 65 6691 : 2004 Ing. Iveta Chovancová
    STN EN ISO 12156-1: 2006 Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Part 1: Test method. Review of STN EN ISO 12156-1: 2003 Ing. Miriam Vrbová
    STN EN ISO 4259: 2006 Petroleum products. Determination and application of precision data in relation to methods of test. Review of STN EN ISO 4259: 1998 Ing. Martina Slezáčková
    STN EN 14538: 2006 Fat and oil derivates. Fatty acid methyl esters (FAME). Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES) Ing. Iveta Chovancová
    STN EN ISO 8217: 2005 Petroleum products. Fuels (Class F). Specification pre marine engines Ing. Martina Slezáčková
    STN EN 12916: 2006 Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection Review of STN EN 12916: 2002 Ing. Ľudmila Joríková
    STN EN ISO 14532: 2005 Natural gas. Vocabulary RNDr. Marek Banič
    STN EN ISO 5164: 2005 Motor fuels. Determination of knocking characteristics. Research method. Review of STN EN 25164: 2001 Ing. Dušan Stacho
    STN CWA 15293: 2005 Motor fuels. Ethanol E85. Requirements and test methods. Ing. Miriam Vrbová
    STN EN 14733: 2005 Bitumen and bituminous fillers. Quality control of bituminous emulsions, fluxed and diluted bitumens in the production. Ing. Jozef Mikulec, CSc.
    STN EN ISO 20847: 2004 Petroleum products. Determination of sulfur content of automotive fuels. Energy-dispersive X-ray fluorescence spectrometry Ing. Iveta Chovancová
    STN EN 237: 2004 Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry. Review of STN EN 237: 1998 Ing. Iveta Chovancová
    STN EN ISO 3170: 2004 Petroleum liquids. Manual sampling. Review of STN EN ISO 3170: 1999 RNDr. Marek Banič
    STN EN 14077: 2003 Petroleum products. Determination of organic halogen content. Oxidative microcoulometric method Ing. Miriam Miškove
    STN EN ISO 20763: 2004 Petroleum and related products. Determination of anti-wear properties of hydraulic fluids. Vane pump method Ing. Dušan Stacho
    STN EN ISO 20623: 2003 Petroleum and related products. Determination of the extreme-pressure and anti-wear properties of fluids. Four ball method Ing. Dušan Stacho
    STN EN 14517: 2004 Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol. Multidimensional gas chromatography method. Ing. Ľudmila Joríková
    STN EN 58: 2004 Bitumen and bituminous binders. Sampling of bituminous binders. Review of STN EN 58+A1: 1996 Ing. Margita Masaryková
    STN EN 13305: 2003 Bitumen and bituminous binders. Framework for specification of hard industrial bitumens Ing. Katarína Patajová
    STN EN 13304: 2003 Bitumen and bituminous binders. Framework for specification of oxidised bitumens Ing. Katarína Patajová
    STN EN 14078: 2003 Liquid petroleum products. Determination of fatty acid methyl esters (FAME) in middle distillates. Infrared spectroscopy method. Ing. Ľudmila Joríková
    STN EN 14213: 2003 Heating fuels. Fatty acid methyl esters (FAME). Requirements and test methods. Ing. Ľudmila Joríková
    STN EN 14214: 2003 Automotive fuels. Fatty acid methyl esters (FAME) for diesel engines. Requirements and test methods. Ing. Ľudmila Joríková
    STN EN 14274: 2003 Automotive fuels. Assessment of petrol and diesel fuel quality. Fuel quality monitoring system Ing. Ivan Šmogrovič
    STN EN 14275: 2003 Automotive fuels. Assessment of petrol and diesel fuel quality. Sampling from retail site pumps and commercial site fuel dispensers Ing. Ivan Šmogrovič
    STN EN 238:1996/A1 : 2003 Liquid petroleum products. Petrol. Determination of the benzene content by infrared spectrometry. Amendment A1 Ing. Zuzana Turayová
    STN 65 6511: 2003 Petroleum products. Natural loss of motor fuels from storage and distribution. New STN Ing. Jozef Mikulec, CSc.
    STN EN ISO 11541: 2002 Natural gas. Determination of water content at high pressure Ing. Anna Šimová, Csc.
    STN EN ISO 10723: 2002 Natural gas. Performance evaluation for on-line analytical systems Ing. Anna Šimová, Csc.
    STN 65 6082: 2001 Petroleum products. Determination of coloured compounds and indicator compound in the gas oil. New STN A. Chorvátová
    STN EN 12766-2: 2001 Petroleum products and used oils. Determination of PCBs and related products. Part 2: Calculation of polychlorinated biphenyl (PCB) content Ing. Anna Šimová, Csc.
    STN EN 12766-1: 2000 Petroleum products and used oils. Determination of PCBs and related products. Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD) Ing. Anna Šimová, Csc.
    STN EN ISO 12937: 2000 Petroleum products. Determination of water. Coulometric Karl Fischer titration method Ing. Martina Slezáčková
    STN EN ISO 10715: 2000 Natural gas. Sampling guidelines Ing. Anna Šimová, Csc.
    STN EN 12597: 2000 Bitumen and bituminous binders. Terminology Dr. Róbert Šumichrast
    STN CR 13838: 2000 Automotive diesel fuels for cars. Determination of filtrability. AGELFI method Ing. Pavol Fehér, CSc.
    STN CR 13837: 2000 Automotive diesel fuels for cars. Determination of filtrability. SFPP method Ing. Pavol Fehér, CSc.
    STN EN 13016-1: 2000 Liquid petroleum products. Vapour pressure. Part 1: Determination of air saturated vapour pressure (ASVP) Ing. Ivan Šmogrovič
    STN EN 13016-2: 2000 Liquid petroleum products. Vapour pressure. Part 2: Determination of absolute vapour pressure (AVP) Ing. Ivan Šmogrovič
    STN EN ISO 12156-1: 2000 Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Part 1: Test method Ing. Pavol Fehér, CSc.
    STN EN 12916: 2000 Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection Ing. Ľudmila Joríková
    STN EN 12596: 1999 Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary Ing. Margita Masaryková
    STN EN 12591: 1999 Bitumen and bituminous binders. Specifications for paving grade bitumens Ing. Margita Masaryková
    STN EN ISO 8973: 1999 Liquefied petroleum gases. Calculation method for density and vapour pressure RNDr. Alžbeta Chorvátová